OPTICO all splitters are manufactured using a very simple process that produces reliable, low-cost devices. The 1X3 PLC Splitter is manufactured according to the special FTTX wiring requirements, but still has the characteristic of evenly splitting the optical signal.
OPTICO fiber optic splitters are available in a wide range of styles and sizes to split or combine light with minimal loss. All splitters are manufactured using a very simple process that produces reliable, low-cost devices. The 1X3 PLC Splitter is manufactured according to the special FTTX wiring requirements, but still has the characteristic of evenly splitting the optical signal.
1x3
G657A or Customized
900um
1260~1650nm
<6.0dB
>55dB
<=0.5dB
<=0.5dB
<=0.2dB
<=0.5dB
4x7x60mm
-40~85℃
Single-mode and Multi-mode are available
Response within 24 hours
100% 3D tested by Daisi or Sumix devices
100% high and low temperature cycle test
Can accept 168 hours of high temperature boiling experiment if necessary
2000000CH/Month of production capacity(very short lead time)
Q: Is the 1x3 Mini PLC Splitter able to join two different optical signals into a single fiber?
A: No, a 1x3 Mini PLC Splitter is designed for splitting an optical signal from one input into three separate outputs, and it does not combine or join signals. If you need to combine two different optical signals into a single fiber, you would typically use a different component, such as our WDM series product or a coupler designed for combining signals. These components are specifically engineered for the purpose of combining multiple signals into a single fiber or separating combined signals into individual fibers.
A: The color of the connector on a PLC splitter is typically green, and it signifies the use of an APC (Angled Physical Contact) connector. The color coding is an industry standard to distinguish between different connector types and their polishing styles. APC connectors are designed to minimize back reflections (return loss) by redirecting reflected light at an angle into the cladding. UPC connector end face is polished flat without an angle for good physical contact.
Q: Is the 1x3 Mini PLC Splitter waterproof?
A: PLC splitters are typically not designed to be waterproof on their own. They are usually installed in controlled indoor environments, such as data centers, central offices, or telecommunication facilities. If there is a need for waterproofing in outdoor or harsh environmental conditions, such as in FTTx (Fiber to the X) applications, additional protective enclosures or closures should be used.
